|
|
Ethought Online SuperMarket - Leviton PR150-1LW Decora 150-Degree Passive Infrared Motion Activated Light Control with Switch, White
|
List Price: $18.88
Our Price: $18.01
Your Save: $ 0.87 ( 5% )
Availability: Usually ships in 24 hours
Manufacturer: Leviton
|
Average Customer Rating:  
|
|
Binding: Tools & Hardware
Brand: Leviton
Color: White
EAN: 0078477127254
Feature: Home automation made simple: Use in home offices, walk-in closets, laundry room, pantries, garages, mud rooms, play rooms, bathrooms, and long dark hallways
Label: Leviton
Manufacturer: Leviton
Model: PR150-1LW
Publisher: Leviton
Studio: Leviton
Warranty: 2 YEARS MANUFACTURES WARRANTY
|
|
|
Features
|
Home automation made simple: Use in home offices, walk-in closets, laundry room, pantries, garages, mud rooms, play rooms, bathrooms, and long dark hallways
Replaces standard, 15A 120V, single pole, grounded wall switch in minutes.
Decora styling with Decora plate
Complete with wiring instructions
UL-CSA-Meets CA.Title 24 Energy code
|
|
|
|
|
|
Editorial Reviews:
|
LEVITON WALL MOUNTED OCCUPANCY SENSOR-W BY LEVITON
|
|
|
Spotlight customer reviews:
|
Customer Rating:
Summary: Bad marketing for this product
Comment: This was basically the only indoor light sensor at our local home depot. So who knew that it was only for "Magnetic Rapid Start" fluorescent bulbs only? Read the fine print. Read the fine print. And who uses "Magnetic Rapid Start" fluorescent bulbs these days anyway?
Customer Rating:
Summary: Not ball while it lasts
Comment: I've had three of these switches in my garage. They all worked very well --- for about one year. After a year, the sensor fails and I am left with a manual on/off switch. If I wanted a manaul on/off switch this would not be my choice.
I'm looking at motion sensor switches again because it is time to replace the third switch. Call me old fashioned, but I would expect a switch to last for at least five years. If you consider the cost of ownership to include annual replacement, this is not a bad product.
Customer Rating:
Summary: Motion Sensor Switch needs some TLC to work correctly
Comment: I have installed a couple of these switches, and they are not just plug-in and forget. The mini-manual the comes with them gives details, but in chinese-english that is hard to understand.
(1) Setup - There are two small thumb-wheel controls beside the motion-sensor. The one is for setting the length of time the switch is ON, and is obvious. The other one is quite delicate and compensates for ambient lighting and the lighting of the moving object. This is especially tricky when the motion sensor has a window in its view, and the ambient light it sees changes from day to night. If you have a window facing the switch, it would be best to put a blind in it to filter out some of the ambient light changes. With patience, I was able to get the switch to work well even though it faced a window. But it takes trial-and-error to compensate for motion during both day and dusk (it doesn't work at night).
(2) Flickering fluorescents - With the widespread conversion to fluorescent lighting, there is a new problem. The small screw-in spiral bulbs that replace incandescent lights have electronic "ballasts", which are totally different from those on the long fluorescent tubes. This motion-sensing light switch does not go completely OFF when there is no motion. A sensitive VOM will measure about 30+ volts on the hot line. However, there is little current available. The 30+ volts is enough to trigger the ballast on the spiral fluorescents, and it tries to light the lamp, however there is not enough current available and the light tries to go on, drains the minimal charge on the line, and then goes out. This repeats and you get a flicker. ---- You can solve this by replacing one of your lights with an incandescent lamp. This will constantly drain the charge trickle through the switch and prevent the voltage building up to trigger the ballast. I have used 45W and 60W bulbs, and both work. They just go in parallel with your spiral fluorescents. And you should no longer have any flicker.
**** With careful installation, these switches work quite well. My wife expecially appreciates the one in our laundry room which goes on automatically when she comes in with piles of laundry (we have a traditional marriage).
Customer Rating:
Summary: screw in fluorescent bulb killer
Comment: Works with fluorescent lights but not the kind you have. Heard a pop after installing this, one of my bulbs is flickering now and the motion sensor doesn't work. Energy saving devices like this is why the planet is doomed.
Customer Rating:
Summary: Not a great product
Comment: I thought... all switches like this were the same. Not so.
This switch does not allow for energy saving fluorescant bulbs to be used, nor does it stay on very long when in use. As an example: I go into the room looking for something and shortly thereafter, the light goes off even if I am moving around. Just what does motion detection mean?
|
|
|
|
|
|
|
|
|
